Knowledgebase
Technická podpora blog Import (tumblr)
SEARCH
LAN-MODULE accessory current sensor

 

LAN-MODULE accessory current sensor

LAN-MODULE-CURR is external current sensor designed  for use with the LAN Controller 2.0. This current sensor works based on hall effect-based linear current sensor principle and it is able to measure both positive and negative current going through. Use of a Hall Effect sensor means the current sensor is able to electrically isolate the current path from the sensor’s electronics (for applications up to 100 V), which allows the sensor to be inserted anywhere along the current path and to be used in applications that require electrical isolation. Output sensitivity is 45 mV/A. Please do not exceed manufacturer’s ratings and keep the manufacturers connection recommendation!

  • Measurement range: +/- 31A
  • Maximum voltage: 100V
  • Overcurrent Transient Tolerance: 100A for 1 pulse maximum 100 ms
  • Working temperature: -40 to 125 C degrees
  • Supply voltage: 3 – 5.5V
  • Typical path internal resistance: 0.6 mOhm
  • Board size: 20 x 18 mm

Links
Help Desk Software by Kayako Case
ERROR: This domain name does not match domain registered in the license key file (apache5.gwl.eu), allowed domains: 127.0.0.1,192.168.5.36,support.i4wifi.cz,support.gwl.eu,kayako.gwl.eu, please change the product path to match the domain under Admin CP > Settings > General Settings
This product will not work properly unless untill that value is changed.

For more information please contact Kayako support at https://my.kayako.com