Charging with up to 16 Amp – check your AC socket quality first!

 

Charging with up to 16 Amp – check your AC socket quality first!

For 16 Amp charging currents we recommend to connect the open end of the charging cable directly to an electrical distribution board. It is also recommended to use CEE Caravan plug or the 3-phase 16/32A 400V 5pin plug.

In case of using common Schuko 16A home plug there is higher risk of melting the connector while operating with more than 10A continuously. Only high quality rubber connectors should be used! Check the socket quality - especially the springs (which hold the contact) for aging!


Help Desk Software by Kayako Case
ERROR: This domain name does not match domain registered in the license key file (apache5.gwl.eu), allowed domains: 127.0.0.1,192.168.5.36,support.i4wifi.cz,support.gwl.eu,kayako.gwl.eu, please change the product path to match the domain under Admin CP > Settings > General Settings
This product will not work properly unless untill that value is changed.

For more information please contact Kayako support at https://my.kayako.com