Question: If the installation is only 1 micro inverter, how can I connect it to the AC 230V grid?

Answer: For simple installation of one or two inverters (or even few inverters) you may connect these directly to the 230V AC socket. Remove the water proof outdoor connector (this connector can be easily dissembled or at worst just cut-away) and install the standard 230V plug. (See the first picture.)

Optionally you can use one connector from the shorter cable side of the micro inverter to make an interconnection to the longer cable side. (See the second picture.)

Note: for permanent installations (especially with more inverters) we suggest to follow the national installation standards and to make a fixed installation with additional protective components – e.g. circuit breaker.