FAQ: RT-BMS system - capacity and voltage indicators

Question: What is needed to display the fuel status (battery capacity) and the voltage from the BMS of the batteries?

Answer: Just connect analog voltmeters to connector A. The connector A on the RT-BMS Master unit provides outputs of the battery status indicators. Pins 6,7,8 provide analog voltage in the range 0 to 3.3V or 0 to 10V. This is set by the jumpers in between the A and C connectors. Pin 9 provides 0 to 3.3V analog or 10V frequency indication. (The 10V frequency indication is compatible with the fuel indicator frequency operation in EV Peugeot, Citroen and others)